Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery


Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5

Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip

Step-3: Download Odin 3.07 and extract the downloaded zip to the computer

Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together

Step-5: Launch Odin on the computer

Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection

Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.

Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file. If it fails, rename CWM recovery filename to tar (remove .md5 extension) and try in Odin again.

Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option

Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically

Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together

Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.

Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet

Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen

Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now

Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.